Filter
Top Products
- 8 -
calling for service, the following information must be available: model number, serial number, and gas
type. This information can be found on the main data plate, located on the side of the unit.
PRECAUTIONS
When scraping off heavy deposits of grease or oil from stainless steel equipment, never use ordinary
steel scrapers. Particles of ordinary steel may become embedded in, or lodge on, the surface of the
stainless steel. These will rust, causing unsightly stains and possible contamination of food. If it is
necessary to scrape, use stainless steel, wood, plastic or rubber tools.
TROUBLESHOOTING
PROBLEM CAUSES / CORRECTIONS
Excessive Valve Handle Temperatures /
Sticking Top Burner Valves
Verify that oven door is closed.
If door is closed properly, call for service.
Improper ventilation.
Poor Ignition Call for service.
Pilot and Burners Will Not Light Verify that main gas supply is turned on.
Verify that burner assembly is properly installed.
Call for service.
NOTES
FORM F38202 Rev. A (07-08) PRINTED IN THE U.S.A.