Vornado VOD Electric Heater User Manual


 
English6
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning,
or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset
the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now
function normally.
If the safety shut-off system repeatedly shuts off your heater or if it
will not reset after following the above procedure, DO NOT
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
1.
2.
3.
4.
5.
VH101 OPERATING CONTROLS
1
1
2
2
POWER ON/OFF
MODE SWITCH
HIGH HEAT
750 watts
FAN ONLY
Fan will run continuously
LOW HEAT
350 watts
CARE & MAINTENANCE
The VH101 has no user serviceable parts. Do not disassemble the
unit as doing so will void your warranty. If service is required, return
your heater to Vornado (see Warranty section for instructions).
The motor inside your VH101 is permanently lubricated and requires
no oiling.
Because your VH101 moves air, it will require regular cleaning. Be
sure to unplug the unit prior to any cleaning activity. Use a vacuum
cleaner with the brush attachment to clean any accumulated dust on
the front grill and the side air inlets.