Filter
Top Products
English6
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning,
or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset
the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now
function normally.
If the safety shut-off system repeatedly shuts off your heater or if it
will not reset after following the above procedure, DO NOT
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
1.
2.
3.
4.
5.
VH110 OPERATING CONTROLS
POWER ON/OFF
HEAT
Control energy consumption
between a maximum of
750 watts (I)
1125 watts (II)
1500 watts (III)
THERMOSTAT
Selectable heat settings
1
2
3
1
2
3