Filter
Top Products
11
English
1. Use the integrated handle
for lifting and carrying.
4. Press the power button ( )
and select Personal Zone Heat
( ) or Whole Room Heat ( ).
Next, set thermostat to desired
temperature using (-/+). You may
also select Fan Only by pressing
( ). Default settings upon first
use will be Whole Room High and
set temperature of 75 degrees.
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
3. Unwrap power cord from Cord
Wrap. Plug power cord into a
standard grounded wall outlet.
COOL DOWN
When you power off your
heater, it automatically enters
a cool down routine in which
the heating element turns
off and the fan exhausts
remaining heat. During Cool
Down, the display counts
down from 60 seconds, then
powers off completely.
2. Position the heater so airflow is
not obstructed.