Vornado EH1-0020-01 Electric Heater User Manual


 
English
7
ADVANCED SAFETY FEATURES
OPERATING TIPS
In smaller areas, you might prefer to set the FAN switch to AUTO. In the AUTO
position, the fan will come on only when the heating element is on.
In larger spaces, your Vornado® Heater will function most effectively with the
FAN switch set to CONT. In the CONT. position, the vortex beam of air will
gently keep the air circulating in the room for even, uniform heating.
Your heater, like any other 1500 watt electric heater, draws up to 12.5 amps of
electric current. If using your heater on HIGH HEAT causes your home’s circuit
breaker or fuse to trip, we offer the following suggestions:
Try turning off other electrical appliances that run on the same circuit as
your heater.
Run your heater on LOW HEAT.
Have your electrician add an additional circuit to your home’s electrical system.
When the room temperature is higher than the set temperature it is normal
and correct to have little to no heat coming out of the VH2 or VH102.
When the unit is first turned on there is a slight delay before heat will start
to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY
ELECTRICAL APPLIANCE.
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element is shut off.
TIP-OVER PROTECTION
Heater will automatically shut off if tipped towards the
front or back.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.