Filter
Top Products
13
English
5. Reinstall Grill. Replace Grill onto Breesi LS and
twist clockwise until the Grill aligns with the
screw hole. Replace screw.
Cleaning the Blade
It is possible to remove the blade should
something accidentally get wrapped around the
motor shaft.
1. First, remove the nut
from the shaft. Turn
the nut clockwise to
loosen. Pull the Blade
straight out from the
shaft.
2. When replacing, be
certain the flat side
of the shaft aligns directly
with the corresponding flat
side on the Blade’s socket.
Push the Blade all the way
on the shaft. Do not use a
hammer as this could result in
bearing damage. Reinstall nut
counter-clockwise until secure.
twist
clockwise
Always unplug Breesi LS before starting any part of the cleaning process.