Filter
Top Products
12 English
5. Reinstall Grill. Replace Grill onto Breesi and
twist clockwise until the Grill aligns with the
screw hole. Replace screw.
Cleaning the Blade
It is possible to remove the blade should
something accidentally get wrapped around the
motor shaft.
1. First, remove the nut
from the shaft. Turn the
nut clockwise to loosen.
Pull the Blade straight
out from the shaft.
2. When replacing, be
certain the flat side of
the shaft aligns directly
with the corresponding flat
side on the Blade’s socket.
Push the Blade all the way
on the shaft. Do not use a
hammer as this could result in
bearing damage. Reinstall nut
counter-clockwise until secure.
Keeping Breesi Clean
twist
clockwise