Filter
Top Products
– 17 –
ARMING ALL PROTECTION
(With Entry Delay ON)
Using the
2
AWAY Key
Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a protected door or
window is opened, or if any movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without causing an alarm. You
may also re-enter through the entrance door, but must disarm the system within the
entry delay period or an alarm will occur.
Close all protected perimeter windows and doors before arming (see CHECKING
FOR OPEN ZONES section). The green READY indicator (if present) on the keypad
should be lit if the system is ready to be armed.
AWAY
1. + 2 ENTER SECURITY CODE THEN PRESS AWAY
(Security Code)
Example: 7
2 9 6 then press the AWAY key.
2.
ARMED
**
AWAY
**
YOU MAY EXIT NOW
LISTEN
The keypad will beep twice, or beep continuously if exit
warning has been programmed for your system, and
displays the armed AWAY message. The red ARMED
indicator also lights.
The "You May Exit Now" portion of the message
disappears when the exit delay expires.