Viper VE 17HSP-EU Vacuum Cleaner User Manual


 
USER MANUAL ENGLISH
CHANGES AND IMPROVEMENTS
VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benets to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by VIPER.
OPERATION CAPABILITIES
All single-disc cleaners are designed to clean and care for floor coverings inside buildings only. The cleaners are suitable for
commercial use, e.g. in hotels, schools, hospitals, etc.
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working
position with the handle(1).
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to ll in a damage
claim. Check that the machine is equipped with the following features:
1. Technical documents:
• SIDE-WINDING POLISHER User Manual
• SIDE-WINDING POLISHER Spare Parts List
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS
VF72309 (1)2009-12 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 3
DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people or damage to objects.
CAUTION!
It indicates a caution related to important or useful functions.
Pay careful attention to the paragraphs marked by this symbol.
NOTE
It indicates the necessity to refer to the User Manual before performing any procedure.