Viking K-827 Water Pump User Manual


 
SECTION TSM 845
PAGE 14 OF 14
ISSUE F
VIKING PUMP, INC. A Unit of IDEX Corporation Cedar Falls, IA 50613 USA
© 3/2013 Viking Pump Inc.
All rights reserved
WARRANTY
Viking warrants all products manufactured by it to be
free from defects in workmanship or material for a
period of one (1) year from date of startup, provided
that in no event shall this warranty extend more than
eighteen (18) months from the date of shipment from
Viking. The warranty period for Universal Seal series
pumps ONLY (Universal Seal models listed below) is
three (3) years from date of startup, provided that in
no event shall this warranty extend more than forty-two
(42) months from the date of shipment from Viking.
UNDER NO CIRCUMSTANCES SHALL VIKING BE
LIABLE UNDER THIS WARRANTY OR OTHERWISE
FOR SPECIAL, INCIDENTAL, INDIRECT,
CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY
KIND, INCLUDING, BUT NOT LIMITED TO, LOST
OR UNREALIZED SALES, REVENUES, PROFITS,
INCOME, COST SAVINGS OR BUSINESS, LOST OR
UNREALIZED CONTRACTS, LOSS OF GOODWILL,
DAMAGE TO REPUTATION, LOSS OF PROPERTY,
LOSS OF INFORMATION OR DATA, LOSS OF
PRODUCTION, DOWNTIME, OR INCREASED
COSTS, IN CONNECTION WITH ANY PRODUCT,
EVEN IF VIKING HAS BEEN ADVISED OR PLACED
ON NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES AND NOTWITHSTANDING THE FAILURE
OF ANY ESSENTIAL PURPOSE OF ANY PRODUCT.
THIS WARRANTY IS AND SHALL BE VIKING’S SOLE
AND EXCLUSIVE WARRANTY AND SHALL BE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, ALL WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT ALL OF WHICH OTHER
WARRANTIES ARE EXPRESSLY EXCLUDED.
See complete warranty at www.vikingpump.com.
TECHNICAL SERVICE MANUAL
CAUTION !
TO REDUCE THE RISK OF LEAKAGE WITH VIKING
MAG DRIVE PUMPS, USERS SHOULD COMPLY
WITH THE FOLLOWING GUIDELINES AND ADHERE
TO THE FOLLOWING PROCEDURES:
Thepumpcongurationandmaterialsusedinapump
are tailored to the application for which it is ordered.
Users should never use a pump for an application
thatisdifferentfromtheapplicationspeciedwhen
the pump was ordered. This includes differences in
liquid, speed, pressure, temperature or viscosity.
Users must understand the characteristics of liquids
they are pumping and be especially aware of any
particulates in the liquid. Particulates can cause
rapid wear of the bushings, especially if carbon
graphite bushings are used. Hard bushings and
hard shafts can reduce the risk of rapid wear, but
the use of hard materials is not always the optimal
solution. In applications involving non-abrasive, non-
self lubricating liquids, carbon graphite bushings are
typically the preferred material.
Users should periodically inspect their pump for
wear. This is especially critical and should be
carried out with greater frequency when carbon
graphite bushings are used or the same pump has
not previously been used for the same application,
including the same liquid, speed, pressure,
temperature and viscosity. Users should promptly
replace worn parts when they are discovered.
Users should continuously monitor pumps that are
handling hazardous liquids. This is especially critical
for unmanned, remote locations. If a user does not
have in-house expertise in the area of monitoring,
it should contact a local engineering rm with
monitoring experience.
MAGNETIC DRIVE PUMPS
SERIES 823 STEEL
825 CAST IRON
827 STAINLESS STEEL
SIZES K & KK