Filter
Top Products
Step 1
Step 3Step 2
Fill tank with cool
tap water.
Replace tank cap. Tighten
by turning clockwise .
Place tank back on
humidifier.
Remove the filter from
the holding basket.
Soak the filter in cool water.
DO NOT squeeze filter.
Place wet filter back in
the filter holding basket
and place back in unit.
SETTING UP YOUR HUMIDIFIER
Placement
Soak Filter
Power
Fill Tank
Remove tank.
Turn tank upside-down.
Remove tank cap by turn-
ing counter-
clockwise
.
Once the filled water tank
has been placed on the
unit do not move humidi-
fier. Doing so could
cause leakage and spills.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE
THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Select a firm, level location at least 6” (15cm) from any
walls for proper airflow. Place the humidifier on a water-
resistant surface, as water can damage furniture and
some flooring.
Kaz will not accept responsibility for property damage
caused by water spillage.
Power Step 1
Step 1 Step 2 Step 3
Step 1
V3800_V3850_OM_EFS.qx 6/9/06 10:56 AM Page 4