Filter
Top Products
Operating Instructions
1. Do not operate the humidifier without water in the Water Tank or without a Wicking Filter
installed.
2. After filling the humidifier, be sure the Power Switch is in the OFF position, then plug the
power cord into a 120 volt AC wall outlet. CAUTION: DO NOT PLUG IN THE CORD
WITH WET HANDS; ELECTRIC SHOCK COULD RESULT.
3. Turn the Switch to either the Hi or Low position. The Power Indicator will illuminate and
the fan will start turning.
4. Direct Outlet away from walls and furniture. If condensation forms on walls or windows,
or if indoor relative humidity exceeds 50%, turn the Power Switch to the low setting,
open door to room where humidifier is operating, or turn unit off.
5. Turn the humidifier off and unplug the humidifier before removing and refilling the Water
Tank.
V3100 IB.qx 1/27/05 11:57 AM Page 5