Filter
Top Products
9
Side Slot
SideTab
Top Track
Side Track
Bottom
Track
Diffuser
Corner
Bottom
Track
7DE$
Bulb Removal and Replacement — continued
Re-installing Bulb and Plastic Diffuser
1. To install the bulb, insert bulb into lamp by
fi rmly holding bulb base and pushing down
and rotating slightly in a clockwise direction to
seat properly.
2. Attach the diffuser to the lamp body by first
inserting the tab located at the bottom of the
diffuser (A) into the opening of the lamp base
(B).
3. Insert one diffuser corner at a time into the side
track and gently down into place into the bottom track.
4. Snap side tab into place on side slot. Entire side of diffuser should be
seated into the track. Repeat for other side of diffuser. Note: Alignment of
diffuser corner into side track.
5. Firmly push diffuser down until Tab A snaps into place. Align top of lens in
top track as necessary.
HappyLite
B
A