Filter
Top Products
2 7
CAUTION:
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The exclamation point within an equilateral triangle alerts
the user to the presence of important operating and
maintenance instructions in this owner’s guide.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY:
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
• Light bulbs get HOT quickly! Do not touch the bulb while the lamp
is on.
• Do not look directly at the lighted bulb without the diffuser being in
place.
• Do not operate the lamp in close proximity to fl ammable or
combustible vapors, such as aerosol (spray) products or where
oxygen is being administered.
• Use only the type of bulb and maximum wattage indicated by
Verilux
®
.
• Never cover the lamp when it is in operation.
IMPORTANT SAFETY INSTRUCTIONS BULB REPLACEMENT
Bulb removal and replacement
1. Unplug lamp from power source.
2. To access the bulb, remove the plastic diffuser by depressing the
tabs (D) and lifting it out.
3. Firmly hold the bulb base (B) (Do not hold the glass portion of the
bulb) and pull bulb from the socket in an outward motion (rocking
slightly if needed).
4. To re-install bulb and plastic diffuser, see instructions on page 6
D
B