Filter
Top Products
10
Cleaning the Inlet
If the inlet is blocked by dust, completely remove the
foreign materials – after first turning the vacuum OFF.
A blocked inlet may result in weakened suction and noise.
If the inlet is blocked, there is also a risk of damage or
malfunction caused by overheating.
Care and Maintenance
Figure 3
Inlet
Collection Cup
Lock Button
Collection
Cup
Filter
Assembly
Figure 4
Figure 5
Outer Filter Inner Filter
Emptying the Collection Cup
1. Disconnect the handheld vacuum cleaner from
the base unit by pressing the release lever at
the rear of the base unit and lifting up.
2. Press the collection cup lock button to
release the collection cup from the vacuum
(see Figure 3).
3. Carefully pull the filter assembly outward and
remove (see Figure 4).
4. Empty the cup.
Cleaning the Filters
5. Unlock the outer filter by twisting it slightly to
the right, clockwise (see Figure 5).
6. Remove the outer filter by pulling it away from
the main casing.
7. Pull the inner filter out to remove.
8. The filters should be cleaned every time the
collection cup is emptied by tapping them
on the side of the collection cup to release
trapped dust.
9. Wash both filters in lukewarm water on a
regular basis.
10. Make sure the filters are completely dry before
reassembly.
11. Reassemble in the reverse order.