Filter
Top Products
3
ASSEMBLY INSTRUCTIONS
Before assembling, please review all instructions.
1. Carefully lay out all parts on fl at surface as shown in illustration.
2. Screw connector (B) into the base (A) and hand tighten.
3. Next, screw post section (C) into connector (B) and hand tighten.
4. Screw post section (D) into post section (C) and hand tighten.
5. Screw post section (E) into post section (D) and hand tighten.
6. Finally, screw the lamp upper assembly (F) into assembled lamp
post (C,D,E) and tighten.
7. Remove the socket ring (I) from the socket (G). Fit the lamp shade
(H) onto the socket (G) and carefully replace the socket ring (I).
Hand tighten socket ring – do not over-tighten.
8. Carefully screw one 60 watt Natural Spectrum
®
light bulb (included)
into the socket.
9. Plug lamp into an appropriate outlet and turn on the dimmer switch
to the preferred brightness level.
10. Save the packaging in case you need to send the lamp to Verilux for
servicing.