Filter
Top Products
6
ASSEMBLY INSTRUCTIONS
Read Instructions Carefully Before
Assembly:
1. Connect the two ends of the Power
Cord (between the base and the
Shaft) using the lock connectors.
2. Carefully tuck excess Power Cord
into the Shaft. DO NOT CUT OR
SHORTEN THE POWER CORD.
3. Insert the Flex Pole and the Shaft
into the Base.
4. Check direction of the lamp and
the hole on the Base, then use
a Philips Head Screwdriver (not
included) to tighten the screw into
the hole. BE VERY CAREFUL
NOT TO PINCH ANY PART OF
THE CORD BETWEEN ANY
METAL PIECES.
Fig. 1