Filter
Top Products
6
ASSEMBLY INSTRUCTIONS
Read Instructions Carefully Before
Assembly:
1. Connect the two ends of the Power
Cord (between the Base and the
Shaft) using the lock connectors.
2. Carefully tuck excess Power
Cord into the Shaft. DO NOT
CUT OR SHORTEN THE POWER
CORD.
3. Insert the Flex Pole and the Shaft
into the Base.
4. Check direction of the lamp and
the hole on the Base, then use
a Philips Head Screwdriver (not
included) to tighten the screw into
the hole. CAUTION: BE VERY
CAREFUL NOT TO PINCH ANY
PART OF THE CORD BETWEEN
ANY METAL PIECES.
Fig. 1