Filter
Top Products
5
HEADERBULB INSTALLATION
To prevent damage during shipping, the Verilux bulb is surrounded by
protective padding. Carefully remove and dispose of the protective
padding. Check to ensure that the bulb is fully seated and has not
come loose from the socket during shipping. There should be no gap
between the bulb and socket.
Before bulb installation, please review all instructions.
Installation
1. Unplug lamp from power source.
2. Firmly hold base (B) and push bulb (C) into the socket (A).
3. Be sure bulb is fi rmly seated in the socket (see below) and
snapped into the metal bulb clip (D).
Removal
1. Unplug lamp from power
source.
2. Firmly hold bulb base (B)
and pull bulb (C) from the
socket (A) in an outward
motion.
A
B
C
D
Correctly seated bulb
Incorrectly seated bulb
No
Gap
Notice
Large Gap