Unpacking Your Lamp
4
1. Remove all pieces from box.
Locate 2 screws and tightening tool.
2. Detach red plastic pieces and store
them in the event you need to
return the lamp.
3.
Important: To avoid scratching
the metal shaft, do not use a sharp
object to cut the plastic covering.
The clear plastic covering on the
shaft is specially designed to tear
away easily.
IMPORTANT NOTE:
Remove red plastic protective
pieces prior to assembly.
General Precautions
•
This portable lamp has
a polarized plug (one blade
is wider than the other).
As a safety feature, this plug
will fit in a polarized outlet
only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still
does not fit, contact a qualified
electrician. Never use with
an extension cord or adapter
unless plug can be fully
inserted. Do not attempt
to defeat this safety feature.
•
Before plugging in the Verilux
HappyEyes Floor Lamp, check
to make sure the voltage
corresponds with the main
voltage of your location
(120 volts).
•
Do not use the HappyEyes
Floor Lamp outside or in wet
locations such as bathrooms.
It is intended for indoor, dry
use only.
•
Not for use with light dimmers,
timers, or motion detectors.
•
This product may cause
interference with radios,
cordless telephones, or devices
that use a wireless remote
control, such as televisions.
If interference occurs, move
the product away from the
device, plug the product or
device into a different outlet,
or move the lamp out of the line
of sight of the remote control
receiver. This lamp complies
with part 18 of FCC.
•
The light bulb may become
loose during transit. To reinstall
the light bulb, see the bulb
replacement instructions.
•
The HappyEyes Floor Lamp
is an electrical device.
DO NOT USE NEAR WATER
Important Safety Instructions
3
Thank you for purchasing the
Verilux HappyEyes Floor Lamp
.
Please read the following safety information before using.