Filter
Top Products
Troubleshooting
PROBLEM
Cleaner won’t run
Cleaner won’t pick-up/loss of suction
Cleaner won’t spray solution
Dust escaping from cleaner
POSSIBLE REASONS
1. Battery not charged.
2. Handle not pushed into housing.
3. Battery dead - won’t hold a charge.
4. Needs service.
1. Dust canister full.
2. Filter dirty.
3. Battery charge getting weak.
4. Hose clogged.
1. Battery charge getting weak.
2. Nozzle clogged.
3. Solution tank not fully engaged.
4. Solution tank empty.
1. Dust canister full.
2. Filter dirty.
POSSIBLE CAUSES
1. Charge battery. For first use, charge for at least 24
hours.
2. Make sure handle is pushed firmly all the way into
housing and pin is visible in the hole in the body.
3. Call VAX CARE on 0870 6061248.
4. Call VAX CARE on 0870 6061248.
1. Empty dust canister
2. Remove filter and clean.
3. Charge battery.
4. Remove dust canister and check inside hose for
any obstruction(s).
1. Charge battery.
2. Call VAX CARE on 0870 6061248.
3. Remove and replace solution tank.
4. Refill solution tank.
1. Empty dust canister.
2. Clean or replace filter.
10
VAX CARE 0870 6061248
Battery Disposal
NOTE: You must never use ordinary batteries for replacement, as these may leak and cause damage.
This product contains Nickel-Cadmium battery and must be disposed of properly. For disposal information, call the VAX care helpline on
0870 6061248
WARNING:
TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING.