Vax 6155 Vacuum Cleaner User Manual


 
14
15
WASH OUT THE BLACK FILTER REGULARLY AND REPLACE OCCASIONALLY
12 34 5
SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
THIS ‘EASY GUIDE’ SHOULD BE READ COMPLETELY AND REFERRED TO AT ALL TIMES
BEFORE USING YOUR Vax
This ‘easy guide’ should be retained with your Vax for future reference. If your Vax
is sold or transferred to a new owner, this guide should be passed on so that the
new owner can become acquainted with the machine and this information. The
following information is provided in the interest of safety. Please read it before
using your Vax.
DO’S
Ensure the mains cable is fully unwound and straightened before use.
Ensure the mains cable is kept well away from the revolving brushes (where
fitted) of your Vax, when it is turned on and running.
Keep the mains cable away from heat, oil, sharp edges and rough surfaces and
avoid damage in any other way.
Exercise extreme care when cleaning stair carpets. Ensure that your Vax is in a
stable position at either the top or bottom of the stairs without over-stretching
the hose or cable.
When cleaning the stair treads, always keep a hand firmly on your Vax.
Follow the instructions in this user guide when fitting and changing accessories
or tools.
Remove the plug from the wall socket before carrying out any maintenance
specified in this guide.
Change dust bags and filters at regular intervals as specified in this guide.
Store your Vax in a dry place.
Have your Vax serviced by an authorised Vax Service Agent only using genuine
Vax spare parts.
DON’TS
Never allow children to tamper or play with your Vax.
Avoid dragging your Vax by the mains cable.
Never tug at the mains cable to remove the plug from the wall socket.
Never allow the complete coiled mains cable to drop on the floor as this may
result in kinks or knots occurring in the cable, causing premature failure.
Dont let anyone touch the rotating brush bar (where fitted) unless your Vax is
disconnected from the mains.
Never use your Vax in the presence of flammable gases.
Avoid sucking up hot items, hazardous liquids or any other material which could
damage your Vax.
Never leave your Vax running unattended.
Never use your Vax without a dust bag except when washing or sucking up
spills.
If your Vax fails to operate, never attempt to repair it yourself as repairs carried
out by an unauthorised or inexperienced person may cause injury to you or
damage to your Vax. Never alter the specification or modify your Vax in any
way.
WARNING: TH1S APPLIANCE MUST NOT BE EARTHED
IMPORTANT: When carrying out any maintenance or cleaning operations on this
product, it is essential that the plug is removed from the wall socket. In the
interests of product improvement, the Company reserve the right to introduce
modifications or alterations without notice.
TROUBLESHOOTING
IF YOUR Vax DOES NOT SUCK UP PROPERLY :
Check to see if the dust bag is full.
Ensure there are no blockages in the hose.
Clean/change the filters.
IF YOUR Vax DOES NOT WASH PROPERLY:
Check to see if the Dirty water bucket is full. If it is, empty it..
Make sure the solution tube is at the bottom of the water/washing solution..
Ensure that the Tube connector on the end of the hose is fitted properly.
TIPS
As your Vax is very powerful, you may find that the dust bag fills up quickly
the first time that you use your VAX.
WHEN WASHING CARPETS OR UPHOLSTERY, ALWAYS TEST FOR COLOUR FASTNESS,
WITH SOME UNDILUTED CLEANER ON A HIDDEN AREA .
When washing deep pile carpets, move the washing tool in the same direction
as the pile lays.
Start from the furthest corner of the room and work backwards towards the
door.
If you are washing very dirty carpets, you may have to wash them several times
over a period of time to bring the dirt to the surface.
Metal or wooden furniture legs may mark a wet carpet, wait until the carpet is
dry before replacing furniture or cover legs with aluminium foil.
Dont allow children or animals onto your carpet until it has had time to dry.
To keep your pump in good working order we recommend you flush your Vax
through with water only (no solution) after washing.
Switch the pump on occasionally (once per month) for 5 seconds to keep it in
good working order, for when you next wash your carpets.