Filter
Top Products
Bag Removal & Replacement
The dirt canister is the removable lower portion of the power unit.
Follow these steps (refer to Illustration #1, #2, and #3)
Make sure the Power Unit is OFF.
1. Unlatch and remove the Dirt Canister. Latches are located on opposite sides of the power unit.
(Illustration #1)
2. Remove the used bag by rotating the cardboard header and pulling down from the plastic bag
adapter. (Illustration #2)
3. Pull off reorder information and seal the bag opening with adhesive flap. Discard used bag.
(Illustration #3)
4. Install new bag by folding over the flap, exposing the hole and cardboard header. Do not
remove reorder information from flap until ready for disposal. Align the slots in the bag collar
with the tabs on the plastic bag adapter. Push the bag collar firmly onto the adapter and
rotate 45º to ensure that the slots are no longer aligned with the tabs. (Illustration #2)
5. Raise the dirt canister to the base of the power unit and engage the latches. Be certain the
dirt canister is “seated” properly to the gasket on the body of the power unit. (Illustration #4)
MODELS: Maxum 5 & Maxum 7
Illustration #3 Illustration #4
Illustration #2
Illustration #1