Filter
Top Products
GETTING STARTED[ 16 ]
Entering Your Area Code
If you enter a 3-digit area code number in the “Area Code” option, your local area code
does not appear in Caller ID messages. For calls received from outside your local area code,
you will see a full 10-digit number.
1) When the phone is in the standby mode, press
MENU/MUTE.
2) Press
UP or DOWN to move the pointer to “Caller ID
Setup
”, then press SELECT/CH.
3) Press
UP or DOWN to move the pointer to “Area Code”,
then press
SELECT/CH.
4) Use the number keypad (0 to 9) to enter a 3-digit
area code.
5) Press
SELECT/CH, and you will hear a confirmation tone.
6) Press
END to exit.
• If your calling area
requires 10-digit
dialing, do not
program this option.
• When the area code
has already been
stored in memory,
the stored area code
will be displayed. To
change it, press
DEL/TRANS and the
number keypad to
enter the new
area code.
TRUC56_OM 12/11/02 9:24 AM Page 16