Filter
Top Products
31
REPLACEMENT OF MAIN COMPONENTS
6-5. REFRIGERATION COMPARTMENT'S PARTS
B. Disassemble duct
C. Pull out the lamp
A. Disassemble lamp shield
- LAMP BULB, LAMP SHIELD
- EVAPORATOR FAN MOTOR
- D-SENSOR, C-SENSOR, T-SENSOR
- EVAPORATOR COIL
- EVAPORATOR DEFROST HEATER
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULBLAMP BULBLAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP BULB
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKETLAMP SOCKETLAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SOCKET
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELDLAMP SHIELDLAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
LAMP SHIELD
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR
DEFROST HEATOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOREVAPORATOR FAN MOTOREVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR FAN MOTOR
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATEREVAPORATOR DRAIN PAN HEATEREVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
EVAPORATOR DRAIN PAN HEATER
REPLACEMENT OF MAIN COMPONENTS
30
4. Assembling TOP GRILL and GRILL ASSEMBLY
1) Connect the screw at the
location on the top
and bottom of the top grill
2) Connect the screw at the
location on the left and
right side of the grill assembly.
# Attention : When screw connected, should well be connected to maintain sufficient sustain
-After assembling , assemble
-Insert into
-After inserting , fix
-Insert reversly for suitable spring elasticity
3. Assembling method of REVERSIBLE DOOR
1) After reversing 180 degree
DOOR ASSEMBLY of ,
have the HANDLE be the
requested side.
2) Assemble as the following
order