Tripp Lite SRXCOOL12K Air Conditioner User Manual


  Open as PDF
of 40
 
8
Operation
Warning: Install the unit according to the instructions in the “Installation” section before attempting to operate it.
Power
Turntheunitonoroffbypressingthe“ON/OFF”button.
Automatic Restart Feature
The unit will turn on and resume operation automatically when power is restored after a power
outage. The unit will use the same settings that it used immediately before the power outage
occurred. Note: If the power outage is brief, the unit will run in Fan mode for two minutes
before resuming normal operation. The delay allows the compressor to depressurize so the unit
will function properly when it enters Cool mode.
Cool Mode
Pressingthe“MODE”buttoncyclesbetweenCoolmode,DehumidifymodeandFanmode.The
“COOL”LEDilluminateswhenCoolmodeisactive.
PresstheTEMP+andTEMP-buttonstosetthetemperatureinCoolmode.Theselected
temperature is shown on the numeric display.
Pressthe“FANSPEED”buttontocyclebetweenhigh,mediumandlowfanspeeds.AnLED
illuminates to indicate the selected fan speed.
Dehumidify Mode
Pressingthe“MODE”buttoncyclesbetweenCoolmode,DehumidifymodeandFanmode.The
“DRY”LEDilluminateswhenDehumidifymodeisactive.InDehumidifymode,thefanruns
at a fixed speed and temperature controls are irrelevant. Close windows and doors for optimal
performance in Dehumidify mode.
Fan Mode
Pressingthe“MODE”buttoncyclesbetweenCoolmode,DehumidifymodeandFanmode.The
“FAN”LEDilluminateswhenFanmodeisactive.
Pressthe“FANSPEED”buttontocyclebetweenhigh,mediumandlowfanspeeds.AnLED
illuminates to indicate the selected fan speed.
Timer
The“TIMER”buttonallowsyoutoscheduletheunittoturnonoroffautomatically.The
“TIMER”LEDilluminateswhenTimermodeisactive.
Timer On (Note: The unit must be off to activate the Timer On function. Confirm that mode,
temperature and fan speed settings are correct before activating the Timer On function. )
Activatethetimerbypressingthe“TIMER”button.PresstheTEMP+andTEMP-buttonstoset
the delay (in hours) before the unit will turn on. The number of hours is shown on the numeric
display.Pressthe“TIMER”buttonagaintoconrmthedelay.
Timer Off (Note: The unit must be on to activate the Timer Off function.)
Activatethetimerbypressingthe“TIMER”button.PresstheTEMP+andTEMP-buttonstoset
the delay (in hours) before the unit will turn off. The number of hours is shown on the numeric
display.Pressthe“TIMER”buttonagaintoconrmthedelay.
Book 1.indb 8 7/29/2011 9:35:04 AM
 previous next