Trane XT300C Thermostat User Manual


 
58
Pub. No. 22-5127-04
69-1214
3. Press Increase or Decrease
until the desired temperature setpoint
displays.
By pressing Increase or Decrease after pressing , you select
the cooling temperature. Example display shows Cool is set for 75°.
NOTICE: This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference
Regulations, CRC c. 1374.
CAUTION
Equipment Damage Hazard.
Can cause permanent damage to the compressor or other equipment.
To avoid possible equipment damage, do not operate cooling when outside temperature is below 50°F
(10°C). See equipment manufacturer instructions. To avoid possible compressor damage, allow the
compressor to remain off for five minutes before restarting.
M17075
Cool
Setting