Filter
Top Products
– 159 –
No.
6
Part name
Compressor
Compressor lead
Procedure
1. Removal of broken compressor
1) Recover the refrigerant gas.
2) Carry out works of 1 of
1
and
2
,
3
.
3) Remove the piping panel (Front).
Remove screws of the piping panel
(Front) and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
Remove screws of the piping panel
(Front) and the piping panel (Rear).
(Hexagonal screw Ø4 × 10, 1 pc.)
4) Remove the piping panel (Rear).
Remove screws of the piping panel
(Rear) and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
5) Remove the valve fixing plate.
Remove bolts of the valve.
(Hexagonal screw Ø6 × 15, 4 pcs.)
Remove screws of the valve fixing plate
and the partition plate.
(ST1T Ø4 × 8, 1 pc.)
Remove screws of the valve fixing plate
and the accumulator.
(ST1T Ø4 × 8, 1 pc.)
Cut off the bundling band for the dis-
charge pipe and the suction pipe and
then remove each sensor and coil lead
of PMV.
6) Remove the sound insulating plate.
(Upper side, outer winding, inner winding)
7) Remove terminal cover from the
compressor and then remove the
compressor lead and also the
compressor case thermo.
8) Remove TD sensor fixed to the
discharge pipe.
9) Remove the compressor lead.
(Leave the ferrite core attached to the
electric parts box as it is.)
Control P.C. board
U : CN200 Red
V : CN201 White
W : CN202 Black
(Tightening torque: 1.47 ± 0.1N•m)
Remarks
Compressor lead
Compressor lead
Ferrite core
Ferrite core
Compressor lead
Ferrite core
Control
Control
P.C. board
P.C. board
Compressor
Compressor
lead
lead
Control
P.C. board
Compressor
lead
Black pipe cover for heat proof,
bundling band for heat proof,
each sensor (TL, TO, TE, TD, TS sensors)
PMV coil lead
Bundling band
Bundling band
for heat proof
for heat proof
TD sensor
TD sensor
Compressor
Compressor
lead
lead
Pipe cover
Pipe cover
Compressor
Compressor
case thermo
case thermo
Bundling band
for heat proof
TD sensor
Compressor
lead
Pipe cover
Compressor
case thermo
Pipe cover,
Pipe cover,
bundling band
bundling band
Discharge pipe
Discharge pipe
TS sensor
TS sensor
Pipe cover,
bundling band
TS sensor
Suction pipe
Suction pipe
Accumulator
Accumulator
Pipe cover, bundling band,
Pipe cover, bundling band,
each sensor (TL, TO, TE, TD, TS sensors)
each sensor (TL, TO, TE, TD, TS sensors)
PMV coil lead
PMV coil lead
Pipe cover, bundling band,
each sensor (TL, TO, TE, TD, TS sensors)
PMV coil lead
Discharge pipe
Suction pipe
Accumulator
Piping panel (Rear)
Piping panel (Rear)
Piping panel (Front)
Piping panel (Front)
Piping panel (Rear)
Piping panel (Front)