Filter
Top Products
Appendix-5
Appendix
No. Photo / Explanatory diagram Procedure
Remove the motor base assembly, partition plate assembly
and the sound insulation board.
Related parts / Screws list
Used screw
Part name
Screw type Quantity
Motor base assembly
(Including motor and fan)
Ø4 × 8 2
Partition plate assembly
(Including reactor)
Ø4 × 8 3
1-5
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Related parts / Screws list
Used screw
Part name
Screw type Quantity
Heat exchanger Ø4 × 8 1
Valve fixing plate Ø4 × 8 1
Compressor bolt 3
1-6
As shown in the left figure, remove the set of refrigeration cycle
assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are
not damaged by dent or deformation. Apply protective
measures to pipes if necessary.
1-7
Sound
insulation board
Partition plate
assembly
Motor base
assembly
Valve fixing plate
Heat exchanger
Compressor