Toro N-DR2000 Home Security System User Manual


 
15
Audio recording: 32 K Compression: OFF Loopback
(
*
1
)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 46342719
3 52403324
5 60504435
1 52413425
3 57474031
5 63565041
1 60524536
3 64575142
5 67635952
Audio recording: 32 K Compression: ON Loopback
(
*
1
)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 87523723
3 110 69 50 32
5 150 104 79 54
1 112 71 51 33
3 136 91 68 45
5 175 129 102 72
1 155 109 83 57
3 178 133 105 75
5 211 173 146 112
Audio recording: 8 K Compression: ON Loopback
(
*
1
)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 110 59 40 25
3 149 83 57 35
5 233 137 97 61
1 153 85 59 36
3 202 116 82 51
5 298 185 135 87
1 245 146 104 66
3 307 193 141 91
5 421 292 224 152
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
Unit: Hour
Unit: Hour
Unit: Hour
Depending on recording conditions, actual available recording times may be shorter than those listed in this
chart.
Using the N-DR2000, it is possible to conduct a variety of recording condition settings for the recorded
content of each individual camera. These conditions may change the available recording time.
Recording times listed in the table are for reference only.
Loopback refers to audio input from the device connected to the network camera/video transmitter. The
N-DR2000 can also record audio transmitted from the network camera/video transmitter. Refer to the
settings manual for more information on loopback settings.
(
*
1)
CU version