Filter
Top Products
12
OPERATION INSTRUCTIONS
Main Controls:
Your Marathon 2000 extractor is equipped with (4) main switches, which
control the spray bar, the brush motor, the vacuum motor and the main power.
The main switch must be activated before operating the transaxle drive. The
machine will glide easily across the floor when pushed forward (without power).
The machine will also be able to be pulled back easily when the power is on or
off. The pump spray and brush will only be activated when the deadman switch is
squeezed.
WARNING:
In order to avoid injury, it is recommended that the Marathon 2000 extractor
be pulled in the reverse direction (without power) in emergency situations
only.
In addition, there is (1) main circuit breaker, (located on the front of the main
control panel):
- (20 amp) circuit breaker – main power