Filter
Top Products
Grille
7. REPAINTING THE GRILLE AND TRIM PIECE
Follow the procedures below to change the color of the
grille.
1. Remove the speaker's angle adjustment screw (1
piece).
2. Detach either of the two mounting brackets attached to
the speaker.
Mounting bracket
Angle adjustment screw
Grille mounting screw
3. Remove the two grille mounting screws from the back of
the speaker.
4. Slide the grille off the speaker.
5. Paint both the grille and Trim Piece.
5-1. Wipe dirt off the grille and Trim Piece with a soft cloth
moistened with a detergent before painting. Do not
use volatile liquids such as thinner.
5-2. Uniformly spray a thin coating of paint over the grille
and Trim Piece changing the spraying positions
gradually.
Notes
• Do not use a roller or brush to paint because the
meshes of the grille could be clogged with paint.
• Use paint that is appropriate for the composition of
the grille and Trim Piece.
Grille: Rolled steel plate
Trim Piece: Fire-resistant ABS resin
• Follow the instructions on the paint when painting.
5-3. After the paint dries, repeat Step 5-2 once or twice to
repaint.
Notes
• Be sure to repeat Step 5-2 at least twice.
• When repainting the front grille, place the grille
upside down so that the surface is painted
uniformly.
6. After the paint has dried, remount the grille to the
speaker.
10