Form No. PL81410061007 - 3/05-5Ms
Printed in the U.S.A.
© 2005 Thermo Pride - North Judson, IN
Phone: 574-896-2133
www.thermopride.com
Dimensions:
5-1/2" wide x 3-5/8" tall x 1-1/2" deep
Description
:
Battery powered, low voltage electronic setback 1
or 2 stage heating and 1 stag
e
cooling thermostat with sealed relay contacts. Pre
-
programmed
with 4 adjust
able
able
able
able
heating and cooling periods
(
including weekdays, Saturday and Sunday)
Electrical Ratings:
1-1/2
AMPS at 24v AC. Requires 2 AA batteries (included)
Temperature Differential:
+ or
-
1°
F factory preset—adjustable from 1/4
°
F to 2-1/
4
°
F
Control Range
:
45
°
F to 90
°
F (7
°
C to 32
°
C
) Farenheit/Celsius and 12/24 hour time capabl
e
Comp
atibilities:
2-8 wire 1 or 2 stage heating/1 stage cooling
—
2-8 wire 1 or 2 stage heating/1 stage cooling—2-8 wire 1 or 2 stage heating/1 stage cooling
gas or oil;
t
erminals G, Y, W1,W2,
erminals G, Y, W1,W2,
erminals G, Y, W1,W2,
erminals G, Y, W1,W2,
RH, B, O, RC
;
s
olid pin connectors allow both 24v and millivolt equ
ipment
Program Settings:
4 preset programs per day heating and cooling. Easily
reprogrammed in 1
° and
15-minute increments with program dial
Compressor Protection:
Built in 5-minute time delay and 5-m
inute minimum ON time
Filter Monitor:
Monitors blower operation time to indicate need for change of filter at specified
Monitors blower operation time to indicate need for change of filter at specified
Monitors blower operation time to indicate need for change of filter at specified
Monitors blower operation time to indicate need for change of filter at specified
increments. F
actory set at 250 hours and adjustable from
0 to
500 hours
(
may be disabled
)
Program Lock Feature:
Lo
cks program so changes cannot be made without unlocking the program
Specifications
AUTO or continuous
ON fan options
Set to HEAT, COOL
or OFF mode
Programming instructions
printed right on thermostat
for easy reference
Easy to read display
alternates between time
& room temperature and
displays set emperature
Simple to program controls
Program review button