Thermo Products HA1042 Humidifier User Manual


 
Application:
F
orced warm-air furnaces
Unit Size
:
15" wide x 11
½" high x 9" deep
Plenum Opening
:
10
¼
" wide x 9
½" high
Bypass Duct
:
6" diameter (collar supplied)
Water Supply
:
Use
¼
" copper (saddle valve supplied)
Electrical
:
Model HA1042 Drain Type with Humidistat
- 24 V. 60 Hz.
Drain Connections
:
5/8
"
dia. (15' vinyl hose supplied)
Controls
:
Manual air shutter Humidistat
with HA1042
Specifications
Type of
Construction
Size of House (sq. ft.)*
500 1000 1500 2000 2500 3000
Tight
Average
Loose
2.1
3.3
4.6
4.2
6.5
9.2
6.4
9.8
13.8
8.5
13.1
18.4
10.6
16.3
23.0
12.7
19.6
27.6
Evaporative Capacity Output
Temp°F
80° 100° 120° 140°* 160°
GPD
8.0 12.2 16.4 19.2 23.2
*Industry Standard rating conditions. 140° hot water supplied to
the humidifier in heat pump applications will increase capacity by
4.3 gallons per day.
HUMIDITY REQUIREMENTS IN GALLONS PER
DAY BASED ON HOUSE SIZE AND TYPE OF
CONSTRUCTION (FROM ARI GUIDELINE F)
*Based on 8 ft. ceiling height.
Tight House
With insulated walls and ceilings, vapor barriers, weather
stripping on doors and windows, and snug doors, windows
and fireplace damper (½ air change per hour)
Average House
Insulated walls and ceilings with vapor barriers, but loose
storm doors, windows and fireplace damper (1 air change
per hour)
Loose House
Without insulation, storm doors, storm windows, weather
stripping or vapor barriers (2 air changes per hour)
Illustrations and photographs in this brochure are only representative.
Due to ongoing engineering upgrades, some variations may occur.
Form No. PL81410061006-2/06-3Ms
Printed in the U.S.A.
© 2006 Thermo Products, LLC - North Judson, IN
Phone: 574-896-2133
www.thermopride.com