Filter
Top Products
DOOR PANELS
OPTIONAL
FACTORY-GLAZED
GLASS OR GLASS
INSERTS
GASKETING,
WEATHERSTRIPPING
HINGES, STRIKES
FRAMES
SILLS, SWING-IN,
SWING-OUT, PATIO
DOOR, SIDELITE
OPTIONS
TRANSOM OPTIONS
Fiber-Classic Door System Specifications
⎠
SPEC
Door System
Specifications
Faces: 1/16-inch minimum thickness, fiberglass-reinforced thermoset composite,
wood-grained in natural northern red oak patterns, stainable and paintable. Door edges:
machinable kiln-dried pine, primed to match color of faces, lock edge reinforced with
engineered lumber core, lockset area reinforced with solid blocking for hardware
backup. Door bottom edge: moisture-proof and decay-proof composite. Core:
foamed-in-place polyurethane, CFC-free,density 2.0 pcf minimum, K-factorof 0.15 for
minimum thermal transmittance. Standard factory sizes may be edge trimmed or end
trimmedinshoporfieldtosuitreplacement doorsize requirements.
Factory-glazed:
Inserts (lites):
perimeter moldings flush with skin and made as integral part of skin.
Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between air-
space typically3/8-inch. Options for grooved Bevelline,Low-E or grillebetween glass
(GBG). Optionalremovablewoodgrilles.
perimeter frames in raised-molding patterns, molded from proprietary
composite, wood grained to match door faces, stainable or paintable, screw-fastened to
doors, screw holes concealed with grain-matched plugs in matching material and finish.
Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between,
airspacetypically3/4-inch. Optionsforleadeddecorative glasstriple-glazedinair space
between tempered glass faces with solid brass or zinc caming. Options for grooved
Bevellineglassoretchedglass. Optional removablewoodgrilles.
Molded from proprietary composite, wood grained to match door faces, stainable or
paintable, screw-fastened to doors, screw holes concealed with grain-matched plugs in
matchingmaterialandfinish.
Swing-inmodels:
Swing-out models:
jacketedthermosetclosed-cell foam,press-fitin kerfsatjambstops in
frames. Extruded thermoplastic elastomer, finned and chambered design, press-fit into
bottom edge of doors. Corner pads at bottom margin corners from jacketed thermoset
closed-cellfoam.
same weatherstrip as swing-in models, bottom gaskets integral
with sills.
Steel, zinc-plated, brass or chrome finish. Screws plated and finished to match
hardware. Min-imum hinge size 4x4x.098 inches. Strikes are proprietary adjustable
type,permittingin-outadjustmentofdoorinframe, upto 3/16inch.
Milled from 5/4 kiln-dried pine, profiled with 1/2-inch stop, minimum depth 4-9/16-
inches. Other frame depths available to match wall constructions. Exterior casing
brickmould in WM180 pattern available. Optional maintenance-free clad frames and
brickmouldsareprefinishedwhite.
Wide range of sill options:
Double-door and hinge patio door models:
Sidelite options:
thermally-broken fixed, adjustable with oak threshold,
swing-in,swing-out,public-access,aluminum,brassorbronzeanodized finish.
double door in 6/8 height and 8/0 height
available with both leaves active and locking astragal available, hinge patio doors in
standard 6/8 height, replacement 6/6 height and 8/0 height available, patio models
availableintwo-panelandthree-paneloptions(onedoor active,othersstationary).
flush-glazed lite models, raised molding models, and raised panel
models with panels flush with doors all available to match doors, in 12-inch and 14-inch
widths. Sidelite systems available with mullions separating doors from sidelites, and
continuoussillsandframehead,orasseparately framedand casedunits,joined together.
Transom frames, either rectangular or elliptical, match door frames and have matching
exterior brickmould. Clear insulated glass or with decorative leaded glass, leaded brass
with solid brass or zinc caming. Optional removable muntins for divided-lite look in
rectangulartransoms.
OPTIONAL
DECORATIVE PANELS
Issued: Oct 2008