Filter
Top Products
Use:
- Take the length of cable required
out of the housing.
- Connect the appliance to the mains.
- Turn the appliance on using the on/
off switch.
- Select the desired speed.
Electronic power control:
- The power of the appliance can be
regulated by using the power regula-
tor control. This function is very use-
ful, as it makes it possible to adapt
the power of the appliance to the type
of work that needs to be done.
Once you hace finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Unplug the appliance to the mains.
- Retract the cable by pressing the
roller cable button and guide the
cable into the appliance.
Carry handle/s:
- The device has a handle on the
upper part so it can be transported
easily and comfortably.
Parking position:
- This appliance has two parking
positions for comfortable and
straightforward storage.
- To make use of the vertical parking
put the appliance in a vertical
position (so that the back part of the
appliance is now leaning against the
floor) secure the hook of the head to
the hook which can be found on the
lower part of the appliance.
- To use the horizontal parking
position, fix the break pad hook to the
hook situated on the rear side of the
appliance.
Safety thermal protector:
- The appliance has a safety device,
which protects the appliance from
overheating.
- If the appliance turns itself off and
does not switch itself on again, dis-
connect it from the mains supply, and
wait for approximately 15 minutes
before reconnecting. If the machine
does not start again seek authorised
technical assistance.
Cleaning
- Disconnect the appliance from the
mains and let it cool before underta-
king any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
Changing the dust bag:
- Change the dust bag when there is
a noticeable reduction in the suction
power of the appliance. (The dust bag
does not necessarily have to be full
to need changing; for example, if very
fine dust has been vacuumed this can
cover the pores in the bag and make
it necessary to replace it).
Manual Auris Ionic 2200.indb 16 05/04/11 13:21