Filter
Top Products
17
it necessary to replace it).
- In any case, change the bag when
the bag full indicator is completely
red.
- Disconnect the hose from the vacu-
um cleaner’s air intake.
- Open bag compartment cover. (Fig
3).
- Remove the bag from the bag sup-
port. (Fig 4).
- Check the condition of the motor
filter.
- Replace the bag with another one,
fitting it to the bag support.
- Close the bag compartment cover;
making sure it is shut properly.
- Connect the hose to the vacuum
cleaner’s air intake.
Changing the filters:
Motor filter:
- Motor filter, it is advisable to be
changed at least once a year or every
100 hours of the appliance’s use.
- To remove filters:
- Open bag compartment cover.(Fig.3)
- The filter motor can be found in the
motor’s turbine air entrance.
- Remove the filter from its housing.
(Fig.4)
- To reassemble the filter, proceed
with the above instructions, in reverse
order.
HEPA air vent filter:
- HEPA air vent filter (High efficien-
cy air filter that efficiently retains
spores, ash, sawdust, pollen…), it is
advisable to change it a least once a
year or after every 100 hours of use.
- To remove filters:
- Open the air outlet grate to access
the filter.(Fig.5)
- Remove the filter from its housing.
- To reassemble the filter, proceed
with the above instructions, in reverse
order.
Supplies
- Supplies can be acquired from dis-
tributors and authorised establish-
ments (such as filters, etc. ) for your
appliance model.
- Always use original supplies, de-
signed specifically for your appliance
model.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise. Do not try to dismantle or re-
pair without assistance, as this may
be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
For EU product versions and/or in case
that it is requested in your country