Swann SW276-ASL Home Security System User Manual


  Open as PDF
of 2
 
1. Package Contents
4. Affixing Cameras
3. Adjusting Camera Angle
7. Where to Place Security Stickers
5. Affixing Imitation Dome Cameras
6. Placing Cameras
2. Attaching Camera Stands
3 or 4 x MaxiBrite Imitation Camera
3 or 4 x MaxiBrite Stand
4 x Small Security Sticker
Large Security Sticker Sign
4 x Imitation Dome Cameras
Mounting Hardware
Quick Start Guide
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: tech@swann.com.au
www.swannsecurity.com
Screw the stand into the
camera and twist clockwise
to tighten
1. Find an appropriate
location to mount camera
Turn the knob to loosen
the stand and camera and
turn again to tighten
1. Find an appropriate
location to mount camera
2. Detach stand from
camera
2. Clean surface when
dome will be applied
3. Use provided scews to
fix stand to surface
1. In front windows
2. On side windows
3. On gates/doors
4. Near an obvious camera
5. On shed doors
6. Near cash registers
7. In warehouse
8. In parking lot
Place cameras near entry points such as front or
rear doors, garage etc. Place under eaves and aim
towards the garage or down the driveway
3. Peel back double-sided
adhesive
4. Re-attach camera to
stand and adjust angle
4. Carefully place rim on
surface and hold for 30s
The camera stand can also be
fixed to the top of the camera
for more versatile applications
 previous