SVAT Electronics VISS7500 Home Security System User Manual


 
www.svat.com
now you can see
MONITOR INSTALLATION & OPERATION
USING THE MONITOR:
When the monitor is in the OFF mode, pressing the Talk/View button
turns the monitor and outside camera ON. Monitor and camera will
automatically turn off after 1 minute.
*NOTE* The cameras CALL button must be pressed first by the visitor,
followed by the Talk/View button in order to speak with your visitor.
DETERRING UNWANTED VISITORS
If you discover unwanted visitors, pressing the WARNING button on the
monitor will engage a loud siren in the outside camera in
order to deter the visitor.
ADJUSTING PICTURE/VOLUME
Volume and Brightness control knobs are located at the bottom of
the monitor for fine tuning.
DOOR UNLOCK
• This system supports any door strike rated between 12-14V DC. The
door will remain unlocked for 10 seconds. Please refer to the wiring
diagram for installation instructions.
145cm ~ 160cm
AC: 110 ~ 240V
The optimum height of the
monitor for installation is
145cm ~160cm from the
center of the pick-up tube of
the monitor to the ground.
Take two screws and fix the support of the
wall-mount on the wall and then install the
monitor.