NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.
9
ACCESSORIES
Decorative
Volcanic Stone P/N 110791 FDVS
Black P/N 053752 AC - BLK
Adjustable Canopy
Damper Clamp P/N 110701 DCK
Thermostat P/N 064248 WTK
Wall Switch Kit P/N 064035 FWSK
OPTIONAL EQUIPMENT
All options are available in kit form, are easy to
install and are packaged complete with all re-
quired parts and instructions. Some of the
option kits need to be fitted prior to completing
the installation of the appliance. The following
paragraphs detail the kit options available.
The appliances covered in this manual are
heater rated and produce a great deal of heat.
Decorative brass trim pieces and hoods may
tarnish because of their proximity to the heater
opening and front face. Tarnishing of these
pieces is normal, unavoidable and should be
expected.
Remote Control Kits
Models RCL and RCL-STAT add the conve-
nience of remote control for your appliance.
The kits include a wireless, hand held trans-
mitter and a receiver. This special receiver
permits either manual or remote control
modes. Both receiver and transmitter operate
on standard 9 volt batteries (not included).
Refer to the RCL and RCL-STAT installation
instructions for specific details.
Damper Clamp Kit
A Damper Clamp Kit is available for use when
required by local codes. Using the damper
clamp to fix open the fireplace damper will
allow this vent free product to be utilized as a
vented decorative gas log set, (see details on
pages 3 and 4).
Wall Switch Kit*
An optional wall switch kit can be installed
along with all vent-free appliances. The kit
consists of a standard UL wall switch with
cover plate. This kit provides for remote (wall)
operation of the appliance. Replace the wall
switch and cover plate of this kit with the
components of the FWSK and you can have true
remote control of your vent-free appliance,
turning it on and off from your favorite easy
chair. The wall switch kit should be installed
along with the appliance.
Remote Control Kit (Standard) P/N H0249 RCL
Remote Control Kit (Deluxe) P/N H0251 RCL-STAT
Wall Thermostat Kit*
A wall thermostat kit is available for use with
these appliances. The wall thermostat is de-
signed to be wired directly to the appliance
millivolt gas control circuit and provide auto-
matic On/Off control of the appliance to main-
tain a desired temperature within the room.
Decorative Volcanic Stone
The decorative volcanic stone, Model FDVS,
can be used to enhance the look of your appli-
ance. Spread the decorative volcanic stone
evenly around the bottom of the firebox.
Adjustable Canopy
An attractive black canopy kit is available for
use with these VF appliances. The canopy kit is
designed to be fitted to the wall above the
firebox opening. In addition to providing an
aesthetically pleasing appearance, the canopy
reduces heat effects to decorative mantles and
finish materials located directly above the fire-
place opening. The canopy kit includes the
necessary attaching hardware.
*Use 18GA, solid two conductor wire to
connect these kits to the appliance.