Sunbeam Bedding HE2100 Electric Heater User Manual


 
8
If your heater fails to operate check the
following:
• Make sure the electrical outlet or circuit
breaker is working.
• Check for obstructions. If you find an
obstruction, turn the heater off and follow
the reset instructions on page 7.
• Check that the thermostat is not set too
low. Turn the thermostat dial clockwise to
adjust the electronic thermostat until the
heater restarts.
• The safety auto shut-off may have
activated, so follow the instructions for
resetting on page 7.
Troubleshooting Guide
Ensure that the heater is switched off and
disconnected from the power outlet before
cleaning.
Carefully wipe the exterior of the heater with
a soft damp cloth and dry thoroughly with a
dry cloth.
Over time, dust may accumulate on the front
grilles. This can be removed by wiping with a
damp cloth.
Store the heater in a cool dry place when
not in use. Store the heater in its carton if
possible.
Care and Cleaning