Filter
Top Products
- 5 -
ASSEMBLING YOUR VACUUM
Check all the parts and identify them against the illustration.
¾ ASSEMBLING YOUR VACUUM CLEANER
Warning: Always unplug from electrical outlet before opening the Dust Cup (5).
Note: Dust Cup Filter (6) must be used when operating the handvac.
1. To open the Dust Cup (5), push Dust Cup Release Button (5) and pull out the Dust Cup (5).
Verify that the Dust Cup Filter (6) is inside then attach the Dust Cup (5) to the handvac.
2. To attach the Furniture Brush (7) or Crevice Tool (8) to the handvac, push brush into the Suction Hole (1), as
shown below.
3. To use the Extension Hose (10), push the end of the hose into the Suction Hole (1) to use independently, or
you may attach the desired brush (7 or 8) to the other end of the Extension Hose (10), as shown below.
aWARNINGa
Improper use of the power cord can result in the risk of electrical shock. If the
power cord is damaged, have it replaced by an authorized service center.