Filter
Top Products
8
Using Your Tower Fan (continued)
Using the oscillation function
The 70 degree oscillation function can be used
on any setting.
1. Turn the unit on and select any fan speed.
2. Press the ‘OSC’ button on the tower or the
remote. The fan will begin to oscillate from
side to side.
To stop the fan from oscillating, simply press
the ‘OSC’ button once again.
Using the preset timer
To set the Timer to turn off
1. Press the on/off button.
2. Press the Preset/Timer button, which
automatically starts at 1hour (1H).
To change the time, press the Preset/Timer
button until the desired time is 1, 2, 4 or 8H.
3. To Turn off the timer, continue pressing the
Preset/Timer button until there is no light
illuminated.
Note: Alternatively, you can press the on/off
switch to turn off the fan and turn back on
again. This also disengages the timer function.