Filter
Top Products
ADJUSTING THE SENSITIVITY SETTING
OF
TUE
ALLERGYSMART”’
SENSOR
You can adjust the operation of the air cleaner by changing the sensitivity
setting of the sensor (average, extra, super). The higher the sensitivity
setting, the fewer the particles counted before the air cleaner comes on.
The chart below shows the particle counts that activate the air cleaner
at the various settings*.
Super
Extra Average
15
60 160
*Particle counts indicated are mean averages. Slight variations exist from unit to unit. Sensitivity levels will
vary
among
individuals based upon factors such as level and type of individual allergic reactions and personal concerns.
TO RUN YOUR AIR (LEANER
AUTOMATICALLY
USING TUE
ALLERGYSMART”
SENSOR....
Your air cleaner will run automatically, turning
on and off, depending on the level of allergen-
sized particles in the air sampled and the
sensitivity setting you have selected. The
automatic mode is activated by selecting a
position on the sensitivity dial setting
(average, extra, super) other than OFF/manual.
Once one of these sensitivity settings is
selected, select your preferred fan speed
(sleep, low, medium, or high).
The AllergysmartTM sensor is now activated.
You will see a blinking green light, indicating
that the sensor is testing.
check setting Quality