Filter
Top Products
SDF 250/400/500
Start up 3-14
3.4. Continuous operation
When you have carried through all basic settings, you can start with continuous operation.
F Make sure that hoppers which are not in use are separated from
the dehumidified air supply.
Make sure that the set drying temperatures are suited for the
materials in the hoppers.
After first filling, do not process the material until after the
dwelling time.
If a return air cooler (optional) is installed, switch on the coolant
circuit .
Make sure that the cooling appliance is connected to the mains
socket (if present, optional).
Check setting of the timer.
Switch on the main switch of the drying hopper.
3.4.1. Continuous Operation of the Hopper
3.4.2. Continuous Operation of the Dryer