Filter
Top Products
SDF 250/400/500
Start up 3-1
3. Start up
This chapter is addressed to the operators of the machine.
This chapter assumes general skills with drying systems and SPS
(PLC) control units.
This chapter assumes that the functional description has been
read and understood.
It must be ensured that the operators have the relevant skills.
F Note down all set values of the control system.
Make sure that the cooling appliance is connected to the mains
socket in the electrical cabinet (if present, optional).
Make sure that any condensate penetrating from the cooling
appliance (optional) does not get inside the dryer or the control
box.
& If the inside temperature of the switch cabinet is above 50º C (122
ºF) the dryer is switched off after 30 minutes if it is operated with
a cooling appliance (optional).
If ordered temperature can be displayed in ºF!