Technical Information
Model door maximum width door maximum
height
72260106 44-5/8″ (113.3 cm) 72″ (182.9 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
use.
Receptor cannot be installed without the wall surround.
10" (25.4 cm)
4" (10.2 cm)
36"
(91.4 cm)
1-5/8" (4.1 cm)
at Midpoint
6-5/8"
(16.8 cm)
7-5/8"
(19.4 cm)
8-3/4"
(22.2 cm)
11-5/8"
(29.5 cm)
11-5/8"
(29.5 cm)
17-5/8"
(44.8 cm)
17-5/8"
(44.8 cm)
12-1/4"
(31.1 cm)
19"
(48.3 cm)
12-1/4"
(31.1 cm)
71-1/4"
(181 cm)
77"
(195.6 cm)
1-1/4"
(3.2 cm)
1-1/4"
(3.2 cm)
16"
(40.6 cm)
8"
(20.3 cm)
37-1/4"
(94.6 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16"
(8.4 cm) OD
Drain Hole
26"
(66 cm)
Recommended Roofing
Nail Locations (4 total)
End Wall
Back Wall
48"
(121.9 cm)
16"
(40.6 cm)
16"
(40.6 cm)
54"
(137.2 cm)
3-7/8"
(9.8 cm)
35-1/4"
(89.5 cm)
29-1/4"
(74.3 cm)
10-1/4" (26 cm)
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
24"
(61 cm)
Product Diagram
ACCORD
®
ACCORD
®
48″ (121.9 cm) RECEPTOR AND SURROUND W/BACKER BOARDS
Page2of2
1092043-4-
A