Filter
Top Products
3. Install the Tank
Carefully turn the tank upside down onto a protected surface. Fit
the rubber gasket over the flush valve nut so the tapered side of
the gasket faces out.
Carefully position the tank on the bowl by centering the gasket
on the bowl inlet. Line up the tank and bowl bolt holes.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of the vitreous china.
Install the bolt gaskets onto the tank bolts, and slide the tank
bolts down through the holes in the tank and bowl.
Assemble the washers and nuts to the tank bolts. Securely tighten
the nuts so the tank is level.
Be sure that the nuts are tight enough to achieve a watertight
seal.
Tank
Gasket
Washer
Brass Nut
Tank
Tank
Tank Bolt
Gasket
Viewing The
Assembly From
Under The Tank
Bowl
Bowl
Sterling 5 1035429-2-D