Filter
Top Products
Back
Size: 8.5"W x 11"H
Job
#: SWH
C 11
1
787
File Name: 111787_Force90_SS.ai
Printing & Finishing: 4/cProc-Offset
Colors: CMYK DIE
Printout Size
100%
Updates: hd3.20/21.06, hd3.31.06,
jpc4/3/06,hd4.04.06,hd4.10/11.06,
hd4.13.06,hd4.17.06,hd4.21.06,
JVSpf.4.26.06
This printout is for indicating
color breaks only.
Do not use for color matching.
Do not measure for accuracy.
Revision: 10
Time: 3 PM
* INSTALL IN ACCORDANCE WITH LOCAL CODES
TOP VIEW
ANODE
(J)
(H)
(K)
HOT COLD
FRONT VIEW
(B)
(G)
(A)
(C)
(F)
(D)
(E)
DIAMETER
SIDE INLET
THERMOSTAT
DRAIN
VALVE
T & P VALVE
SIDE OUTLET
OUTLET
(L)
INLET (L)
Printed in U.S.A.© 2006 State Industries, Inc.SWHC-111787-10M
For Additional Technical Information,
PHONE 800-365-0024
State Industries, Inc.
500 Tennessee Waltz Parkway, Ashland City, TN 37015
www.statewaterheaters.com
Page 2 of 2
SCGSS00806
For complete information on limited warranties, consult written warranty,
or contact the State Customer Care Center, 1-800-365-0024.
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
FORCE 90
™
90% EFFICIENT
Power-Vent Commercial Gas Water Heater
SUGGESTED SPECIFICATION
(Natural or Propane) gas water heater(s) shall be State Force 90 model # SHE50 76NE, with 90% thermal efficiency, a storage capacity of 50 gallons, an input rating of 76,000
BTUs per hour, a recovery rating of 83 gallons per hour at 100ºF rise and a maximum hydrostatic working pressure of 150 psi. Water heater(s) shall be of power-vent design,
using 2", 3" or 4" PVC pipe for horizontal and/or vertical vent runs. Water heater(s) shall have: 1: Seamless, glass lined steel tank construction and a spiral-shaped heat
exchanger placed entirely inside the tank, which shall be glass lined on the flue gas side to protect against acidic condensate. 2: An Intelli-Vent gas control system with silicon
nitride hot surface ignitor. 3: A 3-year limited warranty against tank leaks. Water heater(s) shall meet or exceed ASHRAE/IESNA 90.1-1999, and be design-certified by UL
(Underwriters Laboratories) according to ANSI Z21.10.3-CSA4.3 standards governing storage tank water heaters.
Top inlet and outlet: 3/4" male NPT
Side inlet and outlet: 3/4" female NPT
Gas inlet: 1/2" NPT
DIMENSIONS
70-5/8
A
68-1/4
B
52
C
21
D
9-1/8
E
12
F
22
G
8
H
15-3/4
J
27
KSHE50 76NE
INCHES
SPECIFICATIONS
RECOVERY – GALLONS
PER HOUR
AT DEGREE RISE
SHE50 76NE
MODEL
NUMBER
BTU
INPUT
PER
HOUR
76,000
TANK
SIZE
GALLONS
50
SHIPPING
WEIGHT
LBS.
210206
40°F
22°C
83
100°F
56°C
59
140°F
78°C
Manifold Pressure: 4.0 inches n.c. (.99 kPa); All models–Maximum Supply Pressure: 14 inches w.c. (3.48 kPa)
Minimum Supply Pressure Natural Gas: 5.0 inches w.c. (1.24 kPa); Minimum Pressure must be maintained under both load and no-load (static and dynamic) conditions