Filter
Top Products
Control panel
FIG.17
1. Automatic mode indicator
2. Cooling mode indicator
3. Fan mode indicator
4. Heating mode indicator (for cool & heat
models only).
5. Low ventilation indicator
6. Medium ventilation indicator
7. High ventilation indicator
8. Timer operation indicator
9. “Room temperature” indicator
10. “Water Full” indicator
11. “Set temperature” indicator
12. Sleep function indicator
13. Indicator for UV-Tio2 or Ionizer function (only
for models with UV-Tio2 / Ionizer function)
14. UV-Tio2/Ionizer switch (only for models
with UV-Tio2 or Ionizer function)
15. Sleep function button
16. “Temperature up” button
17. “Temperature down” button
18. LCD display
19. ON/OFF (power) button
20. Timer
21. Speed (ventilation) button
22. Mode (function) option button
23.
Receiver for remote control (see below)
23
Turning ON/OFF
1. Press ON/OFF button, the unit will start in AUTO mode (only when the unit is plugged in
first time). If the ambient temperature is
higher than 75
o
F, the unit will work in cooling mode.
higher than 68
o
F but below or equal to 75
o
F, the unit will work in ventilation mode.
below 68
o
F, the unit will work in heating mode (this is for cooling & heating models only).
** To by-pass this default setting, press mode to select COOL or HEAT mode.
2. Indicators of the functions in progress come on at the same time, e.g. Cool and Lo=Cooling
mode with Low fan speed. *NOTE! The display window shows the ambient room
temperature from 32
o
F to 122
o
F.
3. To turn the unit off, press ON/OFF button again.
4. When turning the unit back on, the unit will return to your last setting.
Setting mode/function
Press MODE button to select required working mode: automatic, cooling, fan or heating, (Heating
is only available for heating & cooling models.)
The indicator of your selected mode comes on.
OPERATION
9
$872
&22/
)$1
+($7
/R
0,
+,
7,0(5
212))
57
:)
7
'2:1
83
6/((3
89,21
05-03-457 A029-OK.PDF